skip to main text

Other device settings

Select this setting item from Device settings in Settings.

  • Key repeat

    Selecting ON lets you quickly display candidate numbers or characters by holding down the up down button during character entry.

  • Original removal reminder

    Selects whether the printer will display the reminder screen in case you forget to remove the original from the platen after scanning.

    Important

    • Depending on the type of original or the state of the document cover, forgetting to remove the original may not be detected.

  • Wi-Fi pairing settings

    In order to connect Canon PRINT Inkjet/SELPHY, multiple configurations will be performed.

    • Enable/disable pairing

      Set the printer's Wi-Fi pairing function to enable or disable.

    • Allow/block additional pairing

      Permit or prohibit the addition of pairing with Canon PRINT Inkjet/SELPHY used in another device.

    • Delete paired devices

      Cancel all Canon PRINT Inkjet/SELPHY pairing.

  • Keyboard layout

    Select the keyboard layout from the following three types.

    • QWERTY

    • QWERTZ

    • AZERTY

  • Ink level monitor

    • Reset ink lev. count

      Resets the remaining ink count.

      Important

      • After refilling the ink to the upper limit line of the ink tank, reset the remaining ink count.

      • If the remaining ink count is reset when the ink tank is not full, the remaining ink level cannot be detected properly.

    • Ink notification

      Enables or disables the function which notifies the remaining ink.

      Important

      • If the remaining ink level notification function is disabled, visually inspect the remaining ink and refill the ink tanks as necessary. Continuing printing with ink below the lower limit line of an ink tank may prevent satisfactory print quality.

      • When changing the remaining ink level notification function from disabled to enabled, it is necessary to refill all ink tanks up to the upper limit line.

  • Fixed print quality

    Specifies print quality when printing on plain paper.